Look around the settings until you find something like “About This Device.” The MAC address should be listed there, though each router differs. This is typically done by either opening up dedicated firmware or by inputting the router’s IP address into the address bar of a traditional web browser. Now you’ll have to access the router’s settings page or admin panel. No luck? Your next step is to ensure that your network is operating properly, with a modem connected to the router via Ethernet cable and the router transmitting a strong wireless signal with an Internet connection. With this address, you can access the device. How can I access a device by MAC address The easiest way to access a device, knowing the MAC address is to use the arp -a command to find the related IP address.

If you have access to either of these, give them a quick look before continuing on. Look for the line in the output that has the MAC address that you know and note down the IP address on that line. First, right-click on the Start menu and select the Command Prompt option 2. However, you will need to manually type in information and be able to sift through the results. It also requires the least number of steps. This information could also be printed in the instruction manual or somewhere in the original box. Finding your MAC address using the Command Prompt feature is the easiest way to locate the required information. Your first step should be to look at the router itself, as the MAC address could be listed on a sticker along with the default network name, default password, and IP address.

Tools: Router, computer, modem, Ethernet cable Here are the steps to find a MAC address. The process of how to find your Media Access Control address differs depending on the make and model of your router, though it is not as complicated as, say, learning how to disable NAT acceleration in your router. With a device’s MAC address on hand, you can block it from the network entirely or allocate bandwidth restrictions.

Finding mac address on a mac